Envsin Instrument Equipment Co., Ltd.
Committed to advancing science and technology by building a world-class enterprise and driving innovation in the instrument testing industry！
Add to Cart
Visualization Observation Window Climatic Test Chamber Rapid Temp Change Test Chamber
The climatic test chamber is used for testing non-heat dissipation test samples and low heat dissipation test samples. For the test of heat dissipation test samples, the heat dissipation power should not exceed the temperature control cooling capacity of the refrigeration system of the climatic test chamber, otherwise it will affect the temperature conversion speed and capacity of the climatic test chamber. It is recommended that the heat dissipation of the test samples be less than 300W.
• Optional APP mobility management.
• Fashionable design of modular construction.
• Optional network video monitoring and data synchronization.
• Long defrosting cycles:over 700h's running before defrosting.
• 4 load power outlets for specimens with programmable control for protection.
• Automatic reminder of equipment maintenance plans and software of recording malfunction.
• Environment-friendly refrigerating control technology:energy saving and rapid heating/cooling rate.
• Outer material: cold rolled steel plate + double-sided electrostatic spraying process
• Inner material: SUS304 high-grade stainless steel plate
• Insulation material: rigid polyurethane foam insulation layer
Model:climatic test chamber | ET4200S2 |
| ET5200S2 | |
| ET6200S2 | |
| Test Space Volume(L) | 200 |
| Test Zones | 2 |
| Hot Chamber Temp.Range(℃) | +50/+200 |
| Cold Chamber Temp.Range(℃) | -75/+70 |
| Temp. Constancy(℃) | ±0.3-±1.0 |
| Temp.Homogeneity(℃) | ±1.0-±2.0 |
| Recovery Time(min) | <5(on Air Outlet) |
| Test Space Dimension(mm) | 600W*550D*600H |
| External Dimension(mm) | 1200W*2500D*2200H |
| Temp. Range(℃) | -40/+150 |
| -55/+150 | |
| -65/+150 | |
| Max. Specimens Weight (kg) | 50 |
| Cooling Methods | Water-Cooled(IEC 60068-3-5) |
| Power | AC380V±10%,50HZ,3/N/PE |
| Compliant with International Standards: GB/T2423.22 MIL STD 202F (Method 107G) IEC 60 068-2-14 Test Na BS 2011 DIN 40046,Test Na JESD22-A101-A | Options Accessories: Independent sensors for protection (NE60519-2.1993) |
