Envsin Instrument Equipment Co., Ltd.
Committed to advancing science and technology by building a world-class enterprise and driving innovation in the instrument testing industry！
Add to Cart
German Technology Climatic Test Chamber With Humidity Control Capability
Climatic Test Chamber for material temperature resistance and product testing can be used when constant climate conditions (temperature and/or humidity) are needed for product testing. It also can be used for a variety of materials of high - low temperature alternating test.
The climatic test chamber is suitable for testing machine equipment, parts and materials at high temperature, low temperature and humid heat or humidity cycle conditions.The climatic test chamber can be used for the heat dissipation test sample and non-heat dissipation test sample test. For the test of heat dissipation test sample, the heat dissipation power can not exceed the cooling capacity of the refrigeration system of the test box, because the control of temperature and humidity is a dynamic balance process, in different temperature and humidity points, the cooling capacity of the refrigeration system is also accompanied by changes.
| • 7 colors touch screen display and 3 bit control system;interface Ethernet/USB |
| • Optional APP mobility management |
| • Design with independent sensors to prevent specimens from damages caused by drew,overheat,less and smog. |
| • Special anti-condensation structures to avoid misjudgment and improve testing accuracy during climate testing. |
| • Strong control abilities of extreme-low humidity range 20℃/10% R.H.. |
| • Unique operation mode: make testing area's temperature back to room temperature after tests are finished |
| • Optional remote-assist service function and teaching CDs |
| Model:Climatic Test Chamber | EC4060 |
| Test Space Volume(L) | 600 |
| Temperature Test Parameters: | |
| Temp. Range (℃) | -45/+180 |
| Temp. Constancy (℃) | ±0.1-±0.5 |
| Temp. Homogeneity (℃) | ±0.5-±2.0 |
| Heating Rate(℃/min) | 4.0 |
| Cooling Rate (℃/min) | 3.0 |
| Temp. Max. Thermal Compensation (W) | 1500 |
| Climate Test Parameters: | |
| Dewpoint Temp.Range (℃) | +4(-3)-+94 |
| Humid. Range (%RH) | 10-98 |
| Humid.Constancy (%RH) | ±1.0-±3 |
| Temp. Constancy (℃) | ±0.1-±0.3 |
| Temp. Homogeneity (℃) | ±0.5-±2.0 |
| Temp and Humid Max.Thermal Compensation (W) | 500 |
| Power | AC380V±10%,50HZ,3/N/PE |
| Optional Accessories: | Standard Version: |
| Independent sensors for specimen protection(NE60519-2.1993) | 3 Power outlets for specimens |
| 1 Entry port Φ100mm | Left and right entry ports Φ50mm |
| Drier filter for compressing air | Silicon Stoppers for entry ports |
| Automatic water supply device | 2 Stainless steel shelves |
| Nitrogen gas auxiliary device | 1 Water tank with 20L |
| Water-Cooled unit | 1 Water filter |
| Spare parts package | |
| E-management and cyber software | |
| Video monitor system | |
| APP for mobility management |
The test temperature, humidity, time can be programmed. Provides conditions of temperature from -42 to +18 0degree and of humidity from 10% to 98%.